Have you been impacted by bushfires?

Read our guide for information on the assistance available to you

Engineering Guidelines

Obtain the guidelines that assist with meeting engineering requirements and Australian Standards for developments and subdivisions in our city.

The following guidelines are provided to assist with meeting our engineering requirements and Australian Standards for developments and subdivisions.

Subdivisions and development standards

Part 1- General requirements

Part 2 - Guidelines for design of roads

Part 3 - Guidelines for stormwater drainage and design

Part 4 - Guidelines for water reticulation

Part 5 - Guidelines for sewer reticulation design

Part 6 - Guidelines for landscaping

Part 7 - Guidelines for testing

Guidelines for water meters

Standard specifications for subdivisions

Engineering standard drawings

Drains

STD-D-10 Grated Gully Pits

STD-D-20 Standard Side Entry Pits

STD-D-21 Special Side Entry Pits for Standard Kerb and Gutter

STD-D-22 Special Side Entry Pits for Semi Mountable Kerb and Gutter

STD-D-23 Offset Lintel and Layback for Grated Sag Pit

STD-D-25 Grates and Frames for Grated Gully Pits

STD-D-30 Standard Drainage Manhole

STD-D-40 Property Inlet Pits

STD-D-50 Surface Inlet Pit

STD-D-51 Surcharge Pit on Flat Ground

STD-D-52 Surcharge Pit on Sloping Ground

STD-D-60 House Connection to Pipes Under Kerb and Gutter

STD-D-70 Standard Concrete Headwalls for 300 to 900 Dia Pipes

STD-D-71 Installation of Precast Reinforced Concrete Headwalls

STD-D-80 Standard Sub-Soil Drainage

STD-D-90 Standard Trench Details Storm Water Drainage

Roads

STD-R-10 AlburyCity Standard Kerb Profiles

STD-R-11 Australian Standard Kerb Profiles Acceptable for Use in AlburyCity

STD-R-15 Mountable Roundabout Details

STD-R-16 Mountable Traffic Island Details

STD-R-20 Standard Perambulator Ramp on New Construction

STD-R-21 Concrete Footpath Details

STD-R-30 Standard Residential Invert on New Construction

STD-R-31 Standard Residential Invert Crossing on New Construction

STD-R-32 Standard Residential Invert on Existing Construction

STD-R-33 Joining of Residential Invert onto Existing Drive Invert

STD-R-34 Joining Residential Crossing onto Existing Invert

STD-R-35 Special Residential Crossing Layback with Back Falling Drive

STD-R-38 Standard Light Industrial Crossing

STD-R-39 Standard Heavy Industrial Crossing

STD-R-40 Standard Footpath Allocations in New Subdivisions

STD-R-41 Road Reserve Parking Bay Details

STD-R-50 Standard Detail for Road and Culvert Entrance

STD-R-51 Details of Set Out of 90 Degree Property Boundaries and Fences

STD-R-52 Chain Wire – Security Fence (1.8m High)

STD-R-60 Installation of Service Trench Adjacent to a Tree

STD-R-70 Roadworks- Standard Street Name Sign

STD-R-71 Road End Barriers

Sewer

STD-S-11 V.C. Sewer Connections

STD-S-21 U.P.V.C. Sewer Details

STD-S-22 Sewer Connection where there is an Obstruction between the Sewer Main and Connection Point

STD-S-30 Sewer replacement Details (Ductile Iron or Equivalent)

STD-S-31 Sewer Main Junction Cut- In Details

STD-S-40 Sewerage Manholes

STD-S-50 Footings in the Vicinity of Sewer Mains

STD-S-51 Footings in the Vicinity of Swimming Pools

STD-S-90 Standard Trench Details Sewer Mains and Water Mains

Water

STD-W-10 Water Service Connection

STD-W-20 Concrete Thrust Block Details

STD-W-30 Hydrant and Stop Valve Cover and Surround Detail